Skip to main content
Article
Basic molten salt process-A new route for synthesis of nanocrystalline Li4Ti5O12-TiO2 anode material for Li-ion batteries using eutectic mixture of LiNO3-LiOH-Li2O2
Faculty of Engineering - Papers (Archive)
  • Md Mokhlesur Rahman, University of Wollongong
  • Jiazhao Wang, University of Wollongong
  • Mohd Faiz Hassan, University of Wollongong
  • Shulei Chou, University of Wollongong
  • David Wexler, University of Wollongong
  • Hua-Kun Liu, University of Wollongong
RIS ID
31834
Publication Date
1-1-2010
Publication Details

Rahman, M. M., Wang, J., Hassan, M. Faiz., Chou, S., Wexler, D. Liu, H. K. (2010). Basic molten salt process-A new route for synthesis of nanocrystalline Li4Ti5O12–TiO2 anode material for Li-ion batteries using eutectic mixture of LiNO3–LiOH–Li2O2. Journal of Power Sources, 195 (13), 4297-4303.

Abstract

A nanocrystalline Li4Ti5O12–TiO2 duplex phase has been synthesized by a simple basic molten salt process (BMSP) using an eutectic mixture of LiNO3–LiOH–Li2O2 at 400–500 °C. The microstructure and morphology of the Li4Ti5O12–TiO2 product are characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). The sample prepared by heat-treating at 300 °C for 3 h (S-1) reveals dense agglomerates of ultra-fine nanocrystalline Li4Ti5O12; with heat treatment at 400 °C for 3 h (S-2), there is a duplex crystallite size (fine < 10 nm, and coarse > 20 nm) of Li4Ti5O12–TiO2; at 500 °C for 3 h (S-3), a much coarser and less-dense distribution of lithium titanate (crystallite size ∼15–30 nm) is observed. According to the results of electrochemical testing, the S-2 sample shows initial discharge capacities of 193 mAh g−1 at 0.2 C, 168 mAh g−1 at 0.5 C, 146 mAh g−1 at 1 C, 135 mAh g−1 at 2 C, and 117 mAh g−1 at 5 C. After 100 cycles, the discharge capacity is 138 mAh g−1 at 1 C with a capacity retention of 95%. The S-2 sample yields the best electrochemical performance in terms of charge–discharge capacity and rate capability compared with other samples. Its superior electrochemical performance can be mainly attributed to the duplex crystallite structure, composed of fine (<10 >nm) and coarse (>20) nm nanoparticles, where lithium ions can be stored within the grain boundary interfaces between the spinel Li4Ti5O12 and the anatase TiO2.

Disciplines
Citation Information
Md Mokhlesur Rahman, Jiazhao Wang, Mohd Faiz Hassan, Shulei Chou, et al.. "Basic molten salt process-A new route for synthesis of nanocrystalline Li4Ti5O12-TiO2 anode material for Li-ion batteries using eutectic mixture of LiNO3-LiOH-Li2O2" (2010) p. 4297 - 4303
Available at: http://works.bepress.com/shulei/7/