Skip to main content
Article
Nanoclay-tethered shape memory polyurethane nanocomposites
Polymer Engineering Faculty Research
  • Sadhan Jana, The University of Akron
Document Type
Article
Publication Date
10-1-2007
Abstract
The study investigated shape memory properties of nanoclay-tethered polyurethane nanocomposites. Polyurethanes based on polycaprolactone (PCL) diol, methylene diisocyanate, and butane diol and their nanocomposites of reactive nanoclay were prepared by bulk polymerization in an internal mixer and the values of shape fixity and shape recovery stress were determined as function of clay content. The melting point of the crystalline soft segment was used as the transition temperature to actuate the shape memory actions. It was seen that clay particles exfoliated well in the polymer, decreased the crystallinity of the soft segment phase, and promoted phase mixing between the hard and soft segment phases. Nevertheless, the soft segment crystallinity was enough and in some cases increased due to stretching to exhibit excellent shape fixity and shape recovery ratio. A 20% increase in the magnitude of shape recovery stress was obtained with the addition of 1 wt% nanoclay. The room temperature tensile properties were seen to depend on the competing influence of reduced soft segment crystallinity and the clay content. However, the tensile modulus measured at temperatures above the melting point of the soft segment crystals showed continued increases with clay content.
Citation Information
Sadhan Jana. "Nanoclay-tethered shape memory polyurethane nanocomposites" Vol. 48 (2007) p. 3790 - 3800
Available at: http://works.bepress.com/sadhan_jana/8/