Skip to main content
Article
Numerical Investigation of an Airfoil with a Gurney Flap
Aircraft Design
  • Cory S. Jang, California Polytechnic State University - San Luis Obispo
  • James C. Ross, NASA Ames Research Center
  • Russell M. Cummings, California Polytechnic State University - San Luis Obispo
Publication Date
6-1-1998
Abstract

A two-dimensional numerical investigation was performed to determine the effect of a Gurney flap on a NACA 4412 airfoil. A Gurney flap is a flat plate on the order of 1–3% of the airfoil chord in length, oriented perpendicular to the chord line and located on the airfoil windward side at the trailing edge. The flowfield around the airfoil was numerically predicted using INS2D, an incompressible Navier–Stokes solver, and the one-equation turbulence model of Baldwin and Barth. Gurney flap sizes of 0.5%, 1.0%, 1.25%, 1.5%, 2.0%, and 3.0% of the airfoil chord were studied. Computational results were compared with available experimental results. The numerical solutions show that some Gurney flaps increase the airfoil lift coefficient with only a slight increase in drag coefficient. Use of a 1.5% chord length Gurney flap increases the airfoil lift coefficient by ΔCl≈0.3 and decreases the angle of attack required to obtain a given lift coefficient by ΔαL=0>−3°. The numerical solutions show the details of the flow structure at the trailing edge and provide a possible explanation for the increased aerodynamic performance.

Disciplines
Citation Information
Cory S. Jang, James C. Ross and Russell M. Cummings. "Numerical Investigation of an Airfoil with a Gurney Flap" Aircraft Design Vol. 1 Iss. 2 (1998) p. 75 - 88
Available at: http://works.bepress.com/rcumming/1/