Skip to main content
Presentation
Effect of microreactor geometry in performance of catalytic microreactor of hydrogen production by CFD modeling
Chisa (2008)
  • Mohsen Behnam, University of Tehran
  • Ali Fazeli, University of Tehran
  • Shohreh Fatemi, University of Tehran
  • Yadolah Mortazavi, University of Tehran
  • A. Khodadai, University of Tehran
Abstract

Hydrogen production from steam reforming of methanol for fuel cell application was modeled in a wall coated micro channel reactor by CFD approach. Heat of steam reforming was supplied from catalytic total oxidation (TOX) of methanol in neighboring channel of steamreforming (SR) channel and conduct from TOX to SR channel through metal divider wall of the channels. Heat integration was compared in zigzag and straight geometry of microreactor by CFD modeling. The model is 2 dimensional, steady state and containing five zones: TOX fluid, TOX catalyst layer, steel wall of the channel, SR catalyst layer, SR fluid. Set of partial differential equations (PDEs) including x and y momentum balance, continuity, partial mass balances and energy balance was solved by finite volume method. And stiff reaction rates were considered for methanol total oxidation (TOX), methanol steam reforming (SR), water gas shift (WGS) and methanol decomposition (MD) reactions, in the model. The results showthat zigzag geometry is beeter than straight geometry because of increasing of heat and mass transfer, mixing.

Keywords
  • Wall Coated Catalytic Micro Channel Reactor,
  • Microreactor,
  • CFD Modeling,
  • Methanol Steam Reforming,
  • Hydrogen Production,
  • zigzag geometry
Disciplines
Publication Date
Summer August 24, 2008
Citation Information
Mohsen Behnam, Ali Fazeli, Shohreh Fatemi, Yadolah Mortazavi, et al.. "Effect of microreactor geometry in performance of catalytic microreactor of hydrogen production by CFD modeling" Chisa (2008)
Available at: http://works.bepress.com/mohsen_behnam1/3/