Skip to main content
Article
Metallic ion extraction using polymer inclusion membranes (PIMs): Optimising physical strength and extraction rate
Faculty of Engineering - Papers (Archive)
  • Chris A Lukey, University of Wollongong
  • Long Nghiem, University of Wollongong
  • Joel Peterson, University of Wollongong
  • Alex Upitis, University of Wollongong
RIS ID
31292
Publication Date
1-1-2009
Publication Details

Upitis, A., Peterson, J., Lukey, C. A. and Nghiem, L. D. (2009). Metallic ion extraction using polymer inclusion membranes (PIMs): Optimising physical strength and extraction rate. Desalination and Water Treatment, 6 41-47.

Abstract
This study investigated both extraction performance and physical properties of a novel type of facilitated transport membrane known as polymer inclusion membrane (PIM). Five different types of poly(vinyl chloride) representing a wide range of viscosity and average molecular weights were used as the base polymer and Aliquat 336 was used as the carrier. Physical properties including membrane hydrophobicity and tensile strength were measured and systematically correlated against the fraction of PVC and Aliquat 336 in the PIMs. Selective extraction between Cd(II) and Cu(II) of the membranes from aqueous solution was then investigated. Results reported in this study indicate that tensile testing can be excellent tool to tune the membrane composition for an optimised mechanical strength. Membranes synthesized in this study showed excellent extraction selectivity between Cd(II) and Cu(II). This could be explained by examining the extraction mechanisms of metal cations involving Aliquat 336 and the speciation of such metals in a chloride matrix which was used in the extraction experiments. Results reported here indicate that physical properties of PIMs are primarily governed by types and composition of the base polymer. In addition, the optimum composition for physical strength does not necessarily result in the best extraction capability. There is a significant scope to fine tune both the extraction rate and physical properties for an optimum PIM performance.
Disciplines
Citation Information
Chris A Lukey, Long Nghiem, Joel Peterson and Alex Upitis. "Metallic ion extraction using polymer inclusion membranes (PIMs): Optimising physical strength and extraction rate" (2009) p. 41 - 47
Available at: http://works.bepress.com/long_nghiem/51/