Skip to main content
Article
The Effect of Hybrid Photovoltaic Thermal Device Operating Conditions on Intrinsic Layer Thickness Optimization of Hydrogenated Amorphous Silicon Solar Cells
Deptartment of Materials Science and Engineering Publications
  • M. Pathak, Queen's University - Kingston, Ontario
  • K. Girotra, ThinSilicon Corporation
  • S. J. Harrison, Queen's University - Kingston, Ontario
  • Joshua M. Pearce, Michigan Technological University
Document Type
Article
Publication Date
6-26-2012
Abstract

Historically, the design of hybrid solar photovoltaic thermal (PVT) systems has focused on cooling crystalline silicon (c-Si)-based photovoltaic (PV) devices to avoid temperature-related losses. This approach neglects the associated performance losses in the thermal system and leads to a decrease in the overall exergy of the system. Consequently, this paper explores the use of hydrogenated amorphous silicon (a-Si:H) as an absorber material for PVT in an effort to maintain higher and more favorable operating temperatures for the thermal system. Amorphous silicon not only has a smaller temperature coefficient than c-Si, but also can display improved PV performance over extended periods of higher temperatures by annealing out defect states from the Staebler–Wronski effect. In order to determine the potential improvements in a-Si:H PV performance associated with increased thicknesses of the i-layers made possible by higher operating temperatures, a-Si:H PV cells were tested under 1 sun illumination (AM1.5) at temperatures of 25 °C (STC), 50 °C (representative PV operating conditions), and 90 °C (representative PVT operating conditions). PV cells with an i-layer thicknesses of 420, 630 and 840 nm were evaluated at each temperature. Results show that operating a-Si:H-based PV at 90 °C, with thicker i-layers than the cells currently used in commercial production, provided a greater power output compared to the thinner cells operating at either PV or PVT operating temperatures. These results indicate that incorporating a-Si:H as the absorber material in a PVT system can improve the thermal performance, while simultaneously improving the electrical performance of a-Si:H-based PV.

Publisher's Statement

© 2012 Elsevier Ltd. Deposited here in compliance with publisher policies. Publisher's version of record: 10.1016/j.solener.2012.06.002

Version
Preprint
Citation Information
M.J.M Pathak, K. Girotra, S.J. Harrison and J.M. Pearce, “The Effect of Hybrid Photovoltaic Thermal Device Operating Conditions on Intrinsic Layer Thickness Optimization of Hydrogenated Amorphous Silicon Solar Cells”Solar Energy, 86, pp. 2673-2677 (2012). http://digitalcommons.mtu.edu/materials_fp/41