In contrast with small laboratory probes developed to evaluate the cooling properties of relatively small samples of a quenchant, the new Liscic/Petrofer probe is designed to measure and record the quenching intensity under real industrial conditions. The Liscic/Petrofer probe is a cylindrical Inconel 600 probe with a 50-mm diameter and a 200-mm length and is instrumented with three thermocouples on the same radius of the cross-section at the middle point of its length. The outer thermocouple measures the temperature 1 mm below the surface, the second one 4.5 mm below the surface, and the third one at the center of the probe. The working principle of the probe is the measurement of the dynamic of heat extraction, which is best represented by the change of temperature gradients. Comparative testing was recently performed with the Liscic/Petrofer probe in two different vegetable oils (canola oil and palm oil) and a commercially available conventional petroleum oil quenchant. The work was performed at the Quenching Research Centre (QRC) of the Faculty for Mechanical Engineering, University of Zagreb, Croatia. The results of this work showed distinctive differences in the quenching behavior of these three quenchant media. The results of this comparative study are reported herein.
Comparative Measurement and Evaluation of the Quenching Intensity of Palm Oil, Canola Oil and a Conventional Petroleum Oil Quenchant Based on Temperature Gradient MeasurementsMaterials Performance and Characterization
Locate the Document
Citation InformationMatijevic, B., Liscic, B., Totten, G., and Canale, L., "Comparative Measurement and Evaluation of the Quenching Intensity of Palm Oil, Canola Oil and a Conventional Petroleum Oil Quenchant Based on Temperature Gradient Measurements," Materials Performance and Characterization, Vol. 6, No. 5, 2017, pp. 757-776.