Inhibition of Barnacle (Amphibalanus amphitrite) Cyprid Settlement by Means of Localized, Pulsed Electric FieldsBiofouling
AbstractThe increasing needs for environmental friendly antifouling coatings have led to investigation of new alternatives for replacing copper and TBT-based paints. In this study, results are presented from larval settlement assays of the barnacle Amphibalanus (= Balanus) amphitrite on planar, interdigitated electrodes (IDE), having 8 or 25 mum of inter-electrode spacing, upon the application of pulsed electric fields (PEF). Using pulses of 100 ms in duration, 200 Hz in frequency and 10 V in pulse amplitude, barnacle settlement below 5% was observed, while similar IDE surfaces without pulse application had an average of 40% settlement. The spacing between the electrodes did not affect cyprid settlement. Assays with lower PEF amplitudes did not show significant settlement inhibition. On the basis of the settlement assays, the calculated minimum energy requirement to inhibit barnacle settlement is 2.8 W h m(-2).
Copyright2008 Taylor & Francis.
Citation InformationRodolfo E. Perez-Roa, Marc A. Anderson, Dan Rittschof, Beatriz Orihuela, et al.. "Inhibition of Barnacle (Amphibalanus amphitrite) Cyprid Settlement by Means of Localized, Pulsed Electric Fields" Biofouling Vol. 24 Iss. 3 (2008) p. 177 - 184
Available at: http://works.bepress.com/dwendt/7/