Skip to main content
Article
A Simulator-Based Analysis of Engineering Treatments for Right-Hook Bicycle Crashes at Signalized Intersections
Accident Analysis & Prevention
  • Jennifer Warner, Oregon State University
  • David S. Hurwitz, Oregon State University
  • Christopher M. Monsere, Portland State University
  • Kayla Fleskes, Oregon State University
Document Type
Post-Print
Publication Date
7-1-2017
Subjects
  • Bicycle commuting -- United States,
  • Urban transportation -- United States,
  • Cycling -- Route choice,
  • Traffic signs and signals -- Control systems
Abstract

A right-hook crash is a crash between a right-turning motor vehicle and an adjacent through-moving bicycle. At signalized intersections, these crashes can occur during any portion of the green interval when conflicting bicycles and vehicles are moving concurrently. The objective of this research was to evaluate the effectiveness of four types of engineering countermeasures – regulatory signage, intersection pavement marking, smaller curb radius, and protected intersection design – at modifying driver behaviors that are known contributing factors in these crashes. This research focused on right-hook crashes that occur during the latter stage of the circular green indication at signalized intersections with a shared right-turn and through lane. Changes in driver performance in response to treatments were measured in a high-fidelity driving simulator. Twenty-eight participants each completed 22 right-turn maneuvers. A partially counterbalanced experimental design exposed drivers to critical scenarios, which had been determined in a previous experiment. For each turn, driver performance measures, including visual attention, crash avoidance, and potential crash severity, were collected. A total of 75 incidents (47 near-collisions and 28 collisions) were observed during the 616 right turns. All treatments had some positive effect on measured driver performance with respect to the right-turn vehicle conflicts. Further work is required to map the magnitude of these changes in driver performance to crash-based outcomes.

Description

© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

This is the author’s version of a work that was accepted for publication in Accident Analysis & Prevention. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Accident Analysis & Prevention, Volume 104, 2017, Pages 46-57.

DOI
10.1016/j.aap.2017.04.021
Locate the Document

The article can be found online at: http://dx.doi.org/10.1016/j.aap.2017.04.021

Persistent Identifier
http://archives.pdx.edu/ds/psu/20593
Citation Information
Jennifer Warner, David S. Hurwitz, Christopher M. Monsere and Kayla Fleskes. "A Simulator-Based Analysis of Engineering Treatments for Right-Hook Bicycle Crashes at Signalized Intersections" Accident Analysis & Prevention Vol. 104 (2017) p. 46 - 57 ISSN: 0001-4575
Available at: http://works.bepress.com/christopher_monsere/81/