Fluidization
Hydrodynamic characteristics of gas-solid fluidization at high temperature (with Shabnam Sanaei, Ramin Radmanesh, Rahmat Sotudeh-Gharebagh, and Jamal Chaouki), Canadian Journal of Chemical Engineering (2010)
Kinetic modeling of propylene homopolymerization in a gas-phase fluidized-bed reactor (with Ahmad Shamiri, Mohamed Azlan Hussain, and Farouq Sabri Mjalli), Chemical Engineering Journal (2010)
Non-intrusive characterization of fluidized bed hydrodynamics using vibration signature analysis (with Mojgan Abbasi, Rahmat Sotudeh-Gharebagh, Reza Zarghami, and M. J. Mahjoob), AIChE Journal (2010)
Prediction of the maximum heat transfer coefficient between a horizontal tube and gas–solid fluidized beds (with Nima Masoumifard and Rahmat Sotudeh-Gharebagh), Heat Transfer Engineering (2010)
Sequential Modeling of Fluidized Bed Paddy Dryer (with Navid Bizmark, Rahmat Sotudeh-Gharebagh, and Hossien Ehsani), Journal of Food Engineering (2010)
Clusters identification and characterization in a gas-solid fluidized bed by the wavelet analysis (with Forough Afsahi and Rahmat Sotudeh-Gharebagh), Canadian Journal of Chemical Engineering (2009)
Determination of hydrodynamic behavior of gas-solid fluidized beds using statistical analysis of acoustic emissions (with Nasim Salehi-Nik, Rahmat Sotudeh-Gharebagh, Reza Zarghami, and M. J. Mahjoob), International Journal of Multiphase Flow (2009)
Effect of geometry of the plenum chamber on gas distribution in a fluidized bed (with Ali Mohammadkhah), Industrial and Engineering Chemistry Research (2009)
Modeling of stagewise feeding in fluidized bed reactor of oxidative coupling of methane (with Mehdi Daneshpayeh, Abbasali Khodadadi, Rahmat Sotudeh-Gharebagh, and Yadollah Mortazavi), Energy and Fuels (2009)
Non-intrusive monitoring of bubbles in a gas-solid fluidized bed using vibration signature analysis (with Mojgan Abbasi, Rahmat Sotudeh-Gharebagh, and M. J. Mahjoob), Powder Technology (2009)
Probabilistic approach to particle-wall contact time in fluidized beds (with Reza Zarghami and Rahmat Sotudeh-Gharebagh), Journal of Heat Transfer (2009)
Influence of hydrodynamic models on dynamic response of the fluidized bed polyethylene reactor (with A. Sarvaramini and Rahmat Sotudeh-Gharebagh), International Journal of Chemical Reactor Engineering (2008)
Investigation of heat transfer between a horizontal tube and gas-solid fluidized bed (with A. A. Hamidi, N. Masoumifard, and Rahmat Sotudeh-Gharebagh), International Journal of Heat and Fluid Flow (2008)
Modeling of the fully developed zone in the riser of circulating fluidized beds (with Rahmat Sotudeh-Gharebagh and Yashar Khalighi), Industrial and Engineering Chemistry Research (2008)
Nonlinear characterisation of pressure fluctuations in fluidized beds (with R. Zarghami and Rahmat Sotudeh-Gharebagh), Industrial and Engineering Chemistry Research (2008)
Particle size distribution in gas-phase polyethylene reactors (with Omid Ashrafi, H. Nazari-Pouya, and Rahmat Sotudeh-Gharebagh), Advanced Powder Technology (2008)
Two-phase sequential simulation of a fluidized bed reformer (with R. Habibi, S. Hajizadeh, and Rahmat Sotudeh-Gharebagh), Chemical Engineering and Technology (2008)
Reactor modeling of fluidized bed ethylene polymerization using dynamic two phase behavior (with Ali Kiashemshaki and Rahmat Sotudeh-Gharebagh), Iranian Journal of Chemistry and Chemical Engineering (2007)
Evaluation of heat transfer coefficient in gas–solid fluidized beds using cluster-based approach (with Shayan Karimipour, Reza Zarghami, and Rahmat Sotudeh-Gharebagh), Powder Technology (2007)
Analysis and modeling of particle-wall contact time in gas fluidized beds (with Reza Zarghami, Rahmat Sotudeh-Gharebagh, and Jamal Chaouki), Chemical Engineering Science (2007)
Sequential simulation of a fluidized bed membrane reactor for the steam methane reforming using ASPEN PLUS (with A. Sarvar-Amini, Rahmat Sotudeh-Gharebagh, and Ali Haghtalab), Energy and Fuels (2007)
Cluster-based modeling of fluidized catalytic oxidation of n-butane to maleic anhydride (with Hamid Reza Hakimelahi and Rahmat Sotudeh-Gharebagh), International Journal of Chemical Reactor Engineering (2006)
Modeling the hydrodynamics of downers by cluster based approach (with Shayan Karimipour and Rahmat Sotudeh-Gharebagh), Industrial and Engineering Chemistry Research (2006)
Two-phase modeling of the gas phase polyethylene fluidized bed reactor (with Ali Kiashemshaki and Rahmat Sotudeh-Gharebagh), Chemical Engineering Science (2006)
Experimental investigation of particle contact time at the wall of gas fluidized beds (with Mohsen Hamidipour, Rahmat Sotudeh-Gharebagh, and Jamal Chaouki), Chemical Engineering Science (2005)
Monitoring the particle-wall contact in a gas fluidized bed by RPT (with Mohsen Hamidipour, Rahmat Sotudeh-Gharebagh, and Jamal Chaouki), Powder Technology (2005)
Reactor modeling of gas-phase polymerization of ethylene (with Ali Kiashemshaki, Rahmat Sotudeh-Gharebagh, and Saeed Pourmahdian), Chemical Engineering and Technology (2004)
Flow structure of the solids in gas-solid fluidized beds (with Jamal Chaouki), Chemical Engineering Science (2004)
Performance of the wide-ranging models for fluidized bed reactors (with Rouzbeh Jafari and Rahmat Sotudeh-Gharebagh), Advanced Powder Technology (2004)
Two-phase simulation of gas-solid fluidized bed reactors by tanks-in-series model (with Rouzbeh Jafari and Rahmat Sotudeh-Gharebagh), Iranian Journal of Chemistry and Chemical Engineering (2004)
Modeling the acceleration zone in the riser of circulating fluidized beds (with Hashen Sabbaghan and Rahmat Sotudeh-Gharebagh), Powder Technology (2004)
Modular simulation of fluidized bed reactors (with Rouzbeh Jafari and Rahmat Sotudeh-Gharebagh), Chemical Engineering and Technology (2004)
Simulation of a catalytic turbulent fluidized bed reactor using the sequential modular approach (with Rahmat Sotudeh-Gharebagh), Fuel Processing Technology (2004)
Modelling of fluidized bed reactor of ethylene polymerization (with Mahmoud Alizadeh, Saeed Pourmahdian, and Rahmat Sotudeh-Gharebagh), Chemical Engineering Journal (2004)
Process Modeling
Effect of surface contaminants on oxygen transfer in bubble columns (with Maryam Asgharpour and Mohammadreza Mohrnia), Biochemical Engineering Journal (2010)
Investigating the synergistic effect of D2EHPA and Cyanex 302 on separation of zinc and manganese (with Tahereh Hosseini, Fershteh Rashchi, and Ehsan Vahidi), Separation Science and Technology (2010)
Leaching of vanadium from LD converter slag using sulfuric acid (with Mohsen Aarabi, Fershteh Rashchi, and Ehsan Vahidi), Hydrometallurgy (2010)
A shrinking particle - shrinking core model for leaching of a zinc ore containing silica (with Vida Safari, Gilnaz Arzpeyma, and Fereshteh Rashci), International Journal of Mineral Processing (2009)
Flow characteristics in an airlift membrane bioreactor (with Amirhossein Khalili, Mohammreza Mehrnia, and Mohammadhossein Sarrafzadeh), Chemical Product and Process Modeling (2009)
Modeling and optimization of the sugar extraction process (with Rahmat Sotudeh-Gharebagh, Hanieh Shamekhi, and Hamidreza Norouzi), International Journal of Food Engineering (2009)
A hybrid GA-SQP optimization technique for determination of kinetic parameters of hydrogenation reactions (with Behrang Mansoornejad and Farhang Jalali-Farahani), Computers and Chemical Engineering (2008)
Bubble size distribution in oil-based bubble columns (with S. Homayouni, M. R. Mehrnia, M. Rajabi, and A. Yazdani), Chemical Engineering and Technology (2008)
Dynamic optimization of the benzene extractive distillation unit (with Azadeh Ghaee and Rahmat Sotudeh-Gharebagh), Brazilian Journal of Chemical Engineering (2008)
Kinetic modeling of oxidative coupling of methane over Mn/Na2WO4/SiO2 catalyst (with Mehdi Daneshpayeh, Abbasali Khodadadi, Yadollah Mortazavi, Rahmat Sotudeh-Gharebagh, and Alireza Talebizadeh), Fuel Processing Technology (2008)
Optimization of radial flow reactors of styrene production (with Rahmat Sotudeh-Gharebagh and Farzad Abdolahi), International Journal of Chemical Reactor Engineering (2007)
Dynamic optimization using a hybrid GA-SQP technique (with Behran Mnsoornejad and Farhang Jalali-Farahani), Chemical Product and Process Modeling (2007)
Multiobjective dynamic optimization of an industrial steam reformer with genetic algorithm (with Ali Alizadeh and Farhang Jalali-Farahani), International Journal of Chemical Reactor Engineering (2007)
Hydrogenation of acetylene: Kinetic studies and reactor modeling (with Ali Ghoorchian and Rahmat Sotudeh-Gharebagh), International Journal of Chemical Reactor Engineering (2006)
Simulation of the synthesis section of Stamicarbon urea process (with Mohsen Hamidipour and Rahmat Sotudeh-Gharebagh), Iranian Journal of Chemistry and Chemical Engineering (2005)
Modeling the synthesis section of an industrial urea plant (with Mohsen Hamidipour and Rahmat Sotudeh-Gharebagh), Chemical Engineering Journal (2005)
Simulation of an industrial pyrolysis gasoline hydrogenation unit (with Rahmat Sotudeh-Gharebagh and Mohammad Ahmadpour), Chemical Engineering and Technology (2005)
Genetic algorithm optimization of the conditions of rice straw pulping with aqueous methanol (with Shahram Navaee-Ardeh, Jamshid Mohmmadi-Rovshandeh, and Abbas Ali Khodadali), Cellulose Chemistry and Technology (2004)
Simulation of an acid-based starch converter (with Arash Iranshahi, Hamid Reza Hakimelahi, and Rahmat Sotudeh-Gharebagh), Chemical Engineering and Technology (2004)
No subject area