Articles

PDF

Evaluation of an Innovative System for Improving Readability of Passive UHF RFID Tags Attached to Reusable Plastic Containers (with S. Roy and B. Roesner), Packaging Technology and Science (2011)

Radio frequency identification (RFID) is a contactless identification technology that has proven to work well...

 

PDF

An Exploratory Model for Predicting Post-Consumer Recycled PET Content in PET Sheets (with Dong Ho Kang, Rafael Auras, and Keith Vorst), Polymer Testing (2011)

An exploratory model for determining post-consumer recycled polyethylene terephthalate (PET) content in PET sheets for...

 

PDF

Life Cycle Inventory of HDPE Bottle-Based Liquid Milk Packaging Systems (with Aric Krasowski and S. Paul Singh), Packaging Technology and Science (2011)

This study aims at providing a relatively straightforward methodology to serve as a decision-making tool...

 

PDF

Evaluation of the Stress-Energy Methodology to Predict Transmitted Shock through Expanded Foam Cushions (with L. Ignatova, E. Olsen, and P. Singh), Journal of Testing and Evaluation (2010)

Mechanical stresses experienced by packages in the distribution environment include shock and vibration amongst several...

 

PDF

Life Cycle Inventory Comparison of Paper and Plastic Based Packaging Systems for Strawberry Distribution (with Aric Krasowski), Journal of Applied Packaging Research (2010)

The goal of this study was to conduct a life Cycle Inventory (Lei) analysis based...

 

PDF

An Evaluation of the Ability of RFID Tags to Withstand Distribution of Fresh Produce in the RPC Pooling System (with S. P. Singh, K. Desautels, K. Saha, and E. Olsen), Packaging Technology and Science (2010)

This study focused on the ability of radio frequency identification (RFID) tags applied on reusable...

 

PDF

Measurement, Analysis and Comparison of Drops Experienced by Packages in Inter-State and Intra-State Next Day Shipments in United States (with K. Saha and S. P. Singh), Journal of Applied Packaging Research (2010)

Several past studies have been conducted for the purpose of measuring and analyzing the dynamics...

 

PDF

Measurement and Analysis of Truck and Rail Vibration Levels in Thailand (with V. Chonhenchob, Paul Singh, S. Sittipod, D. Swasdee, and Supoj Pratheepthinthong), Packaging Technology and Science (2010)

Worldwide increase in trade, foreign direct investment, capital flows, migration and the spread of technology...

 

PDF

Measurement and Analysis of Temperature and Pressure in High Altitude Air Shipments (with Sher Paul Singh, J. Stallings, Gary J. Burgess, and K. Saha), Packaging Technology and Science (2010)

This study was performed (at the request of the FAA) to measure temperature and pressure...

 

PDF

Measurement and Analysis of ‘Small’ Packages in Next-day Air Shipments (with Sher Paul Singh, K. C. Chiang, and K. Saha), Packaging Technology and Science (2010)

Packaged goods are shipped globally using various means of transportation. Over the past two decades,...

 

PDF

Measurement and Analysis of Shocks to Products Packaged in Pails in Single Parcel Ground Shipments (with Sher Paul Singh and Pakapol Kittipinyovath), Packaging Technology and Science (2009)

The objective of this study was to measure and analyse the shocks and impacts experienced...

 

PDF

Effect of Manufacturer's Joint Fastening Techniques on Compression Strength of Corrugated Fiberboard Boxes (with A. Attema, Eric Olsen, and Keith Vorst), Journal of Applied Packaging Research (2009)

A flat piece of corrugated fiberboard, which has been cut, slotted and scored, is often...

 

PDF

New Pressure Sensitive Device to Measure and Predict Package Drops (with Sher Paul Singh and Young Paek), Journal of Applied Packaging Research (2009)

Pressurex®, a tactile pressure sensor film which is manufactured by Sensor Product Inc. (East Hanova,...

 

PDF

Packaging Trends for Bottled Water (with N. Noble, L. Paul, C. McMinimee, and M. Mallett), Journal of Applied Packaging Research (2009)

The Journal of Applied Packaging Research (JAPR) is an international forum for the dissemination of...

 

PDF

RFID Tag Readability Issues with Palletized Loads of Consumer Goods (with Eric Olsen, Keith Vorst, and K. Tripp), Packaging Technology and Science (2009)

Radio Frequency Identification (RFID) is an automatic identification technology, relying on storing and remotely retrieving...

 

PDF

Design-An Opportunity in Reducing Corrugated Fiberboard Carbon Footprint (with R. Kisch, J. Chhun, and Eric Olsen), Journal of Applied Packaging Research (2009)

Telescoping Half Slotted Containers (HSC) and Diagonal Corner Bliss style containers are popular choices for...

 

PDF

Flexography Printing Performance of PLA Film (with J. Jacobson, Malcom Keif, Xiaoying Rong, and Keith Vorst), Journal of Applied Packaging Research (2009)

During the past decade polylactide acid (PLA) polymer has been the subject of numerous researches...

 

PDF

A Study of the Effect of Pictorial Markings and Warning Labels on Handling of Packages in the DHL Single-Parcel Environment (with Sher Paul Singh, T. Voss, and K. Saha), Packaging Technology and Science (2009)

Over the past two decades, there has been a heavy influx in the number of...

 

PDF

Effect of Truck Vibration during Transport on Damage to Fresh Produce Shipments in Thailand (with V. Chonhenchob, S. Sittipod, D. Swasdee, P. Rachtanapun, and S. P. Singh), Journal of Applied Packaging Research (2009)

The increase in global trade allows packaged products to be shipped across borders using inter-modal...

 

PDF

Performance of Pre-Cut Lettuce Packaged in Biodegradable Film Formed on Commercial Vertical-Form-Fill-and-Seal Machines (with J. Wyatt Brown, Keith Vorst, and Shasta Palmer), Journal of Applied Packaging Research (2009)

The purpose of this study was to determine the feasibility of using biodegradable films suitable...

 

PDF

Dynamic Analysis of Less-than-truckload Shipments and Test Method to Simulate This Environment (with Sher Paul Singh, E. Joneson, and G. Grewal), Packaging Technology and Science (2008)

This paper provides results from a comprehensive data measurement study that analyzed the vibration dynamics...

 

PDF

Characterization and Compression Properties of Injection Molded Carbon Nanotube Composites (with Grey Curtzwiler, J. Miltz, Jimmy Doi, and Keith Vorst), Journal of Applied Polymer Science (2008)

Since the development of carbon nanotubes (CNTs) in 1991, they have received much attention with...

 

PDF

Measurement and Analysis of Truck Transport Environment in Brazil (with Giovani Otavio Rissi, Sher Paul Singh, and Gary J. Burgess), Packaging Technology and Science (2008)

Increasing trade in today’s global economy requires packaging to be designed to contain, protect and...

 

PDF

The Effect of Ventilation and Hand Holes on Loss of Compression Strength in Corrugated Boxes (with Eric Olsen, S. P. Singh, J. Manley, and F. Wallace), Journal of Applied Packaging Research (2008)

Corrugated packaging is used to package approximately 90% of all products that reach retail store...

 

PDF

Effect of Unitization and Product Types on Readability of Tagged Packages of Consumer Goods (with R. Holtz, S. P. Singh, and K. Saha), Journal of Applied Packaging Research (2008)

Proper implementation of radio frequency identification (RFID) has the potential to revolutionize supply chain management....

 

PDF

Effect of Utilization and Product Types on Readability of Tagged Packages of Consumer Goods (with R. Holtz, S. P. Singh, and K. Saha), Journal of Applied Packaging Research (2008)

Proper implementation of radio frequency identification (RFID) has the potential to revolutionize supply chain management....

 

PDF

RFID Research and Testing for Packages of Apparel, Consumer Goods and Fresh Produce in the Retail Distribution Environment (with S. P. Singh, M. McCartney, and R. Clarke), Packaging Technology and Science (2008)

Radio frequency identification (RFID) is a term used for any device that can be sensed...

 

PDF

Performance Comparison of Thermal Insulated Packaging Boxes, Bags and Refrigerants for Single-parcel Shipments (with S. P. Singh and Gary J. Burgess), Packaging Technology and Science (2008)

A range of packaging solutions exists for products that must be kept within a specific...

 

PDF

An Examination of the Variables Affecting RFID Tag Readability in a Conveyer Belt Environment (with C. Deupser, Eric Olsen, and S. P. Singh), Journal of Applied Packaging Research (2007)

There is a growing list of companies implementing radio frequency identification (RFID) systems to help...

 

PDF

Measurement and Analysis of Vibration Levels on Warehouse and Retail Store Material Handling Equipment (with S. P. Singh, P. Gaur, and K. Saha), Journal of Applied Packaging Research (2007)

Material Handling Equipment (MHE) is widely used to move packaged goods from manufacturing to warehousing,...

 

PDF

Variability in Compression Strength and Deflection of Corrugated Containers as a Function of Positioning, Operators, and Climatic Conditions (with P. Bainbridge, S. P. Singh, and Eric Olsen), Journal of Applied Packaging Research (2007)

ASTM D642 is a commonly used standard for measuring the ability of containers to resist...

 

PDF

Measurement and Analysis of Truck and Rail Shipping Environment in India (with Sher Paul Singh, A. P. S. Sandhu, and E. Joneson), Packaging Technology and Science (2007)

Free trade agreements have been on the rise in all regions of the world in...

 

PDF

Comparison of Package Cushioning Materials to Protect Post-harvest Impact Damage to Apples (with Bundit Jarimopas, Sher Paul Singh, and S. Sayasoonthorn), Packaging Technology and Science (2007)

Damage to fruits and vegetables continues to be a big challenge as global markets become...

 

PDF

Development of Wholesale Packaging to Prevent Post-Harvest Damage to Rose Apples (with Bundit Jarimopas, Siam Toomsaengtong, Sher Paul Singh, and Rangsinee Sothornvit), Journal of Applied Packaging Research (2007)

The purpose of this research was to determine post-harvest damage to rose apples due to...

 

PDF

Measurement and Analysis of the Shocks Generated During Egg Production (with Chris Ferrier and Paul Singh), Journal of Applied Packaging Research (2007)

In their journey from the laying cage to shipments out of an egg production operation,...

 

PDF

Measurement, Analysis, and Comparison of the Parcel Shipping Shock and Drop Environment of the United States Postal Service with Commercial Carriers (with S. P. Singh, G. Burgess, and K. Saha), Journal of Testing and Evaluation (2007)

The past decade has shown a great increase in the number of direct to consumer...

 

PDF

The Use of RFID in Manufacturing and Packaging Technology Laboratories (with Manocher Djassemi), Proceedings of the 3rd SME International Conference on Manufacturing Education (2005)

Mandated use of Radio Frequency Identification (RFID) on goods at pallet, case and item level...

 

PDF

Package Performance Testing of Dangerous Goods in High Altitude Shipments (with S. Paul Singh and Gary J. Burgess), HAZMAT Packager & Shipper (2003)

This paper discusses the impact of high altitude shipments on package integrity. High altitude shipments...

 

Reports

PDF

Report to the Provost: Task Group on the Future of the Library (with Joseph Grimes, Linda Halisky, Wayne H. Howard, Timothy J. Kearns, Franz J. Kurfess, Michael D. Miller, Roxy Peck, George J. Petersen, and Christopher Yip), Report to the Provost: Task Group on the Future of the Library (2007)

The Provost's task group met Spring Quarter 2007 to examine the role of the library...