Articles
Adaptive control of induction motor with unknown motor resistance (with Nadir Kabache and Rafik Bradai), AMSE periodicals (2007)
Fuzzy logic – based controller for position regulation of electric drives (with Aleksander V. Chermalikh, Ivan Ia. Maidansky, and Aissa Kheldoun), AMSE Periodical (2007)
Influence of overvoltages in induction motors fed by PWM voltage inverters on power efficiency (with Mohammed Tahar Belassel, Rachid Beguenane, and Stéphane Simard), IEEE Canada, Electrical Power Conference, 25 & 26 october, 2007, Montréal (Canada) (2007)
Localisation of Production Placement and Reduction of Energy Transfer (with Tarak Mesbah and Kamel Bounaya), Asian J. of Information Technology (2007)
The first step in the planning of the electrical supply networks consists in defining the...
Adaptive control of induction motor using artificial neural network with estimation of rotor flux (with Nadir Kabache and Anatoly Nikolaevitch Ladiguin), Electrotekhnika (Electrical Engineering Russia) (2007)
Bearings fault diagnosis in Asynchrounous Machine based on current analysis using High Resolution Technique (with Mounir Djeddi, Pierre Granjon, and Benoit Leprettre), International Journal of Factory Automation, Robotics and Soft Computing (2007)
New Technique of One and Simultaneous Two Open-Switches Fault Automation Detection and Location in Two Level Three Voltage Inverter (with Tarak Benslimane), IEEE SoutheastCon 2007, Circuits and Devices (2007)
Implementation of a New Hysteresis Control Strategy for Autonomous Parallel Active Filter (with Tarak Benslimane and Kamel Aliouane), International Journal of Emerging Electric Power Systems (2006)
The goal of this paper is to evaluate performances of a new hysteresis current control...
A new diagnostic method of faulty transistor in a three phase inverter (with Tarak Benslimane), Journal of Electrical & Electronic Engineering (2006)
Choice of Input Data Type of Artificial Neural Network to Detect Faults in Alternative Current Systems (with Tarak Benslimane), American Journal of Applied Sciences (2006)
Voltage and current disturbances elimination with reactive power compensation using unified power quality conditionner (with Tarak Benslimane and Kamel Aliouane), IEEE proceedings (2006)
New Energetic Performances of Electrical Drives By Using Artificial Intelligence (with Nadir Kabache, Aissa Kheldoun, Rafik Bradai, Aleksander Chermalikh, and Mabrouk OMRANI), INISTA 2005, International Symposium on Innovation in Intelligent Systems and Applications, Yildiz University (2005)
Reliability Improvement of Induction Motor Electric Drives (with Mohand tahar Belassel, Tarak Benslimane, Djalal Eddine Khodja, and Mabrouk Omrani), INISTA 2005, International Symposium on Innovation in Intelligent Systems and Applications, pp. 44-48, Yildiz University, Istanbul (Turkey) (2005)
In the present work, different methods and tools, have been presented for the reliability improvement...
Development of Neural Networks module for fault identification in asynchronous machine using various types of reference signals (with DjalalEddine KHODJA), CNF IEEE (2005)
Digital Calculation of Frequency of Periodical Signal (Sinusoidal and Triangular (with Tarak Benslimane), IEEE Explore (2005)
– In This paper, a method of digital calculation of frequency of periodical signal (sinusoidal,...
Paramètres capacitifs et surtensions dans l’enroulement d’un moteur asynchrone, alimenté par un convertisseur MLI (with M.T. Belassel and Victor Bespalov), Electrotechnika (2005)
Dans ce travail nous présentons une méthode de calcul des paramètres capacitifs et des surtensions...
A method of minimizing the power losses in an induction motor with a squirrel-cage with vector (with Aissa Kheldoun), Electrical Technology Russia (Electrichestvo) (2004) [in RUssian] (2004)
A method of minimizing the power losses in an induction motor with a squirrel-cage with vector control (with Aissa Kheldoun), Electrical Technology Russia (Electrichestvo) (2004)
An approach to optimizing the flux linkage of the rotor of an induction motor is...
Energy saving by using artificial intelligence for specification control and diagnostic of electric drives with induction machines (with Aissa Kheldoun, DjalalEddine Khodja, and Nadir Kabache), Proceeding of the international conference on computational intelligence (ICCI`2004), NICOSIA, TRNC. (2004)
ANN system for identification and localisation of failures of automazed electric asynchronous drive (with Djalal Eddine Khodja), 2nd International Symposium on Electrical, Electronic and computer engineering and Exhibition, March, 11-13, NEU-CEE2004, NICOSIA, TRNC, (2004)
Control of Over-Voltages due to Capacitors Banks at Customer Systems (with Hocine Labar, Kamel Bounaya, M.S. Keliaia, and Tarak Mesbah), 2nd International Symposium on Electrical, Electronic and computer engineering and Exhibition, NEU-CEE2004, NICOSIA, TRNC, (2004)
This paper describes concerns for capacitor switching transients at customer buses (hydrocarbon) witch cause...
Model based minimisation of power loss in vector control induction (with Aissa Kheldoun), 2nd International Symposium on Electrical, electronic and Computer engineering and exhibition, March, 11-13, NEU-CEE, (2004)
Artificial neuron network usage for asynchronous motor malfunction diagnostics in real-time operation mode (with DjalalEddine KHODJA), Elektrotechnika (2003)
In the article it is told about the device of automatic diagnostics of electromechanical systems,...
Adaptive control of induction machine by fuzzy logic (with Aissa Kheldoun), Journal of Oil and Gas Technologies (2003)
The effective operation of a decoupled induction machine by rotor field oriented technique is altered...
Adaptive Nonlinear Control of Induction Motor Using Neural Networks’ (with Nadir Kabache), IEEE Explore (2003)
Application of the neurone – fuzzy technique for the minimisation of MF of asynchronous machine fuzzy speed regulator (with Rafik Bradai), the Journal of the Extendable Energies (Revue des Energies Renouvelables) / proceedings of the first International Conference on the Energy Efficiency/ ISSN 1112-2242 (2003)
From their early discovry, the fuzzy-neural techniques did not show enough use and interest in...
Control of Transient Over-Voltage at Customers Buses due to the switching capacitors (with Hocine Labar, Kamel Bounaya, and Tarak Mesbah), Journal of the Extendable Energies (Revue des Energies Renouvelables) (2003)
This paper describes concerns for capacitor switching transients at customer buses witch cause power...
Energy loss optimization of a cage asynchronous motor controlled by the oriented rotor field technique (with Aissa Kheldoun), Journal of the Extendable Energies (Revue des Energies Renouvelables) / Proceedings of the First International Conference on The Energy Efficiency / ISSN 1112-2242, pp.422-427 (2003)
Real Time Diagnostic of a set of electronic converter asynchronous motor faults and result comparisons of three artificial neurone networks (with Djalal Eddine Khodja), Journal of the Extendable Energies (Revue des Energies Renouvelables) / Proceedings of the First International Conference on The Energy Efficiency / ISSN 1112-2242, pp. 457-463 (2003)
Adaptive Nonlinear Control of an Asynchronous Machine using Neurone Networks Driven in Real Time (with Nadir Kabache), Journal of the Extendable Energies (Revue des Energies Renouvelables) / Proceeding of the First International Conference on The Energy Efficiency / ISSN 1112-2242, pp. 457-463 (2003)
To avoid the various constraints related to the feddback linearisation control (FBLC), in this paper...
Rationalization Politics of the energy use in Algeria: existing situation and development perspectives (with Ali Groune), Proceedings of First Russian Conference Energy saving: theory and practice, Moscow Power Engineering Institute, Moscow (Russia), vol.1, pp.111-119 (2002)
Adaptive non-linear control of an asynchronous machine using two artificial neuron networks, Laboratory of Research on the Electrification of the Industrial Enterprises University of Boumerdès, Algeria. (2001)
Etude d'un observateur de perturbation et son application pour l'élaboration d'un dispositif numérique de mesure indirecte du couple (with Mohand Said Haddag), First Instrumentation and Measurement in Petroleum Applications Conference (IMPAC'2000), ISSN: 1112-3001 (2000)
L'objectif du présent travail est la mesure indirecte du couple de charge d'un moteur électrique...
Commande vectorielle indirecte d'un moteur à induction par logique floue (with Aissa Kheldoun), First Instrumentation and Measurement in Petroluem Applications Conference (IMPAC-2000) (2000)
La commande vectorielle indirecte est actuellement la technique la plus utilisée pour contrôler la vitesse...
Real-time intelligent failure diagnosis of electromechanical systems (with Abdesslam Lebaroud and MohAmokrane Aitouche), Advances in Modelling and Analysis (1999)
Optimum and ininterrupted operation of industrial mechanisms can not be sought without a system thaht...
Application of the artificial intelligence techniques for the choice of the variable speed drive systems (with Toufik Khaldi, Cherif Kara, and M. Fenneche), Cements Concretes Plasters Lime Magazine (Revue Ciments Betons Platres Chaux (1998)
La vitesse variable des moteurs électriques constitue un facteur d'économies d'énergie. L'intérêt pour ce système...
Development of the industrial expert system and its application for the rational choice of crushing and grinding facilities of a cement factory (Développement du système expert industriel et son application pour le choix rationnel des installations de concassage et de broyage d'une cimenterie) (with Cherif Kara, Galina Tcheremechko, and Irina Merazka), International Journal on Advanced Technologies (Revue Internationale des Technologies Avancées) (1998)
Les économies d’énergie électrique suscitent un intérêt croissant dans le domaine de l’industrie des...
Automatic diagnosis of electromechanical system anomalies, Proceedings of International Annual Conference of the University of Batna (IEEA'97), pp.289-293 (1997)
Interpretation module elaboration of information and its application for the recognition of asynchronous motor faults (with Abdessalam Lebaroud), Proceedings of International Annual Conference of the University of Batna (IEEA'97), pp.94-97 (1997)
Le Diagnostic automatique des anomalies des Systèmes Electromécaniques, Proccedings of the IEEA'97/// International Conference (1997)
Le fonctionnement optimal et continu des mécanismes industriels ne peut être envisagé sans la présence...
Elaboration of a diagnosis automated system of electric machine breakdowns (Elaboration d'un système automatisé de diagnostic des pannes des machines électriques) (with Abdessalam Lebaroud), Cements Concretes Plasters Lime Journal (Revue Ciments Betons Platres Chaux) (1996)
Le problème de maintenance revêt une importance capitale dans les secteurs industriels des pays en...
Elaboration of an automised system for the diagnosis of the break down of the electrical machines, converters and control (with Abessalam Lebaroud, MohAmokrane Aitouche, and Mohamed Said Boumedine), Proceedings of the 5th International Conference one Modelling and Simulation of Electric Machines, Converters Systems and (ELECTRIMACS '96, Flight. 3/3, pp.1061-1065 (1996)
This study aims at developing an automised and computer assisted system to diagnose failures in...
Application of the industrial expert system for the choice of the electric motors of the cement factory of Meftah, Algeria (Système expert industriel d’aide au choix des moteurs asynchrones en cimenterie) (with Cherif Kara and M. Fenneche), Cements Concretes Plasters Lime Journal (Revue Ciments Betons Platres Chaux (1995)
L’industrialisation en Algérie, qui a débuté dans les années 70, a été accompagnée par un...
Development of a C.A. D. system allowing the choice of the power of the electric motors (with Toufik Khaldi, Ibrahim Boudjenah, and Cherif Kara), International Journal of the Advanced Technologies (Revue Internationale des Technologies Avancées), (1995)
La diminution des pertes d’énergie dans les systèmes d’entraînement électrique peut être effectuée par l’amélioration...
Development of a process and a numeric device of couple indirect measurement (with Mohamed Said Haddag), Proceedings of Conference on Modelling and Simulation in Electrical Systems (CMSES'95), , pp.342-349, University of Guelma (Algeria) (1995)
Development of a C.A.D. system allowing the optimal choice of the lifting mechanism electric drives (Elaboration d’un système de C.A.O permettant le choix optimal des entraînements électriques des mécanismes de levage) (with L.A. Iliachenko), Research Work Periodic of The Moscow Power Institute (1989)
Le présent article est consacré à la description d’un système de conception assistée par ordinateur...
Chapter in a Book or Booklet
"Bearings fault diagnosis in Asynchrounous Machine based on current analysis using High Resolution Technique", International book: Emerging Technologies, Robotics and Control Systems (with Mounir Djeddi, Pierre Granjon, and Benoit Leprettre), Emerging Technologies, Robotics and Control Systems (2007)
In this Chapter, we propose to perform early fault diagnosis using spectral analysis based on...
Perspectives of the use of the solar energy in Algeria, 100 p., (with Anatoly Dimitrievich Frolov) (1984)
Supervised Doctorate Theses
ALGORITHME D’ELABORATION D’UN RESEAU ELECTRIQUE A GESTION OPTIMALE D’ECOULEMENT DES PUISSANCES, - (2007)
Un des baromètres (indicateurs du niveau d’évolution ) de développement d’un pays, est sa consommation...
Elaboration d’éléments optimisés de commandes vectorielles d’une machine asynchrone avec leurs implémentations sur un circuit à architecture reconfigurable de type FPGA, - (2007)
In the present work we suggest the application of ANN and ANFIS to design optimized...
Amélioration des performances de la commande du moteur asynchrone à cage et élaboration d’un estimateur universel de ses paramètres en utilisant les RNA, - (2007)
La présente thèse a été consacrée à la recherche d’une combinaison, entre les propriétés des...
Elaboration d’un Système Intelligent de Diagnostic et de Surveillance en Temps Réel des Moteurs à Induction, Doctorate Theses (2007)
Amélioration des Performances d’un Variateur de Vitesse Contrôlé par la Méthode à Flux Orienté, (2007)
The present work is an attempt to improve the efficiency and the robustness of vector...
Étude des processus ondulatoires et des surtensions dans les moteurs asynchrones alimentés par des convertisseurs à semi-conducteurs, - (2006)
This work concerns the survey of undulatory processes and over voltages in the asynchronous machines...
Accepted papers
Application of artificial intelligence ressources for increase speed controller efficiency in vector induction machine drive (with Rafik Bradai and Anatoli N. Ladiguin), Electrotechnika (2007)
Control of Over-Voltages due to Capacitors Banks at Customer Systems (with Hocine Labar, Kamel Bounaya, M.S. Keliaia, and Tarak Mesbah), Journal of Oil & Gas Technologies, in English, acceptance letter on date of 30 November 2003. (2006)
Elements of Algeria’s energetic policy (with Ali Groune), Journal of Hydrocarbons & Gas Technologies, in English, acceptance letter on date of 30 November 2003. (2003)
Supervised Master degree Theses
Optimisation des régimes de fonctionnement d'un moteur asynchrone à cage entrainant une charge variable (2007)
L’objectif de ce travail est l’optimisation du régime de fonctionnement des moteurs asynchrones lorsqu’ils sont...
Development of the diagnosis automatic system of the induction machine failings using artificial neuron networks, Laboratory of Research on the Electrification of the Industrial Enterprises University of Boumerdès, Algeria (2001)
Vector Control of a cage asynchronous with total losses minimisation and logic fuzzy adaptation rotor resistance, Research Laboratory on Electrification of Industrial Enterprises, Boumerdès University (2001)
Adaptive non-linear control of an asynchronous machine using two artificial neuron networks, Laboratory of Research on the Electrification of the Industrial Enterprises University of Boumerdès, Algeria. (2001)
Indirect Measurement of the load couple of an electric motor by an observer. Application to the direct current motors with separated excitation and to elastic mechanical link, Laboratory of Research on the Electrification of the Industrial Enterprises, University of Boumerdès, Algeria. (2000)